Zycoo Network Square Speaker SQ10 is a series of versatile and high-performance network speakers with SIP support. The SQ10 series is represented by eight models: four for concealed mounting and four for surface mounting, which can be selected according to different application scenarios.
A built-in microphone provides half-duplex or full-duplex paging or intercom depending on the software platform. When used with the push-to-talk button, calls to a pre-defined extension or task trigger can be initiated from a room with a speaker.
Network speakers of the SQ10 series support POE, which facilitates connection to local networks with a POE switch via a CAT 5 / 6 cable. No external power supply or other additional wiring is required.
With peripheral integration support, SQ10 can connect to strobe lights, call buttons, volume control, external LED/LCD monitor, door sensor, etc.
The standard SIP protocol is implemented, you can register the SQ10 to any third-party SIP server, such as an IPPBX system or a PBX system, and the functions described above are partially applicable.
Features
Average sensitivity 91dB/1m/1W
THD <0.1%
Frequency range 70Hz - 20KHz
The maximum sound pressure level at a distance of 1 m (passive) 101dB SPL
Capacity 8? 10W
Amplifier Class D single-channel topology
Coverage area 90° H 50° V 30 m2
RST key Press and hold for 3 seconds to announce the IP address. Press and hold for 10 seconds to reset the device to factory settings
Built-in microphone +
Audio codecs G.722, G.711 A-law, G.711 U-law, G.729
Clock display +
Blymalka +
Cell +
Video codec H.264
LCD support UART Serial LCD Display (Configurable)
Call button 2x Keys + 2x Key LEDs
Dry contact Max AC125V-1A/DC60V-1A
Power connector PoE IEEE 802.3at /DC24V-2A
Dimensions 11.43 cm (4.5'')
